Skip to product results

LIONVII / QUALITY ASSURANCE

Quality Assurance
& Belt Testing

Explore the test results behind four selected LionVII belt models. See what was tested, compare the findings and understand how the results apply to each model.

Find your belt

Results apply to the submitted samples, tested parts and conditions in each report—not to every LionVII product or a guaranteed product lifespan.

01 / TESTED PRODUCTS

Find the results for your belt.

Match the model and ASIN before using a result. Each selected model has one physical report and one chemical report.

Elastic / metal buckle

Ratchet Elastic Stretch Belt

Product reference (ASIN) B0D28Y6Z4P

Physical report: GZHT91431637Chemical report: GZHT91431640

Elastic webbing with an aluminum metal ratchet buckle.

20,000repeated-extension cycles

No rubber-thread breakage or damage was recorded after testing, before heat ageing.

Strap, buckle-attachment and belt-body strength
PassSATRA TM181:2017
Chemical test items
Report-listed items: Pass.Specified AFIRM RSL Level 1 scope; PFAS and flame retardants excluded.

Submitted sample · before heat ageing. Conditioned at 23±2°C and 50±4% R.H. for at least 48 hours, then tested in the same environment.

Test methods & specimen results

The useful-extension measurement was 98.2%. The report records “No Comment” for this item; it is not a Pass/Fail rating or a recommended wearing stretch.

SATRA TM181:2017 — reported specimen values
Tested partSpecimen 1 (N)Specimen 2 (N)
Strap to buckle354.8372.1
Strap & buckle555.0592.0
Belt body6260.15919.5

Strength conclusion is reported at the test-item level. Values are not a rated working load. “-” is retained where shown in the original report.

View this belt

Elastic / plastic buckle

Elastic Stretch Belt

Product reference (ASIN) B07P9LCSLF

Physical report: GZHT91431655Chemical report: GZHT91431667

Elastic webbing with a YKK polyacetal plastic buckle; metal-free construction.

20,000repeated-extension cycles

No rubber-thread breakage or damage was recorded after testing, before heat ageing.

Strap, buckle-attachment and belt-body strength
PassSATRA TM181:2017
Chemical test items
Report-listed items: Pass.Specified AFIRM RSL Level 1 scope; PFAS and flame retardants excluded.

Submitted sample · before heat ageing. Conditioned at 23±2°C and 50±4% R.H. for at least 48 hours, then tested in the same environment.

Test methods & specimen results

The useful-extension measurement was 87.0%. The report records “No Comment” for this item; it is not a Pass/Fail rating or a comfort score. The YKK buckle is a product specification, not a laboratory authenticity certification.

SATRA TM181:2017 — reported specimen values
Tested partSpecimen 1 (N)Specimen 2 (N)
Strap to buckle231.6224.4
Strap & buckle397.8412.7
Belt body5708.15641.9

Strength conclusion is reported at the test-item level. Values are not a rated working load. “-” is retained where shown in the original report.

View this belt

Nylon / plastic buckle

Nylon Work Belt

Product reference (ASIN) B07DP5T3FN

Physical report: GZHT91431626Chemical report: GZHT91431630

800D nylon with a YKK polyacetal plastic buckle; metal-free construction.

Passstrength test conclusion

The strap, buckle and related-attachment strength test item met the report requirements.

SATRA TM181:2017
Pass
Chemical test items
Report-listed items: Pass.Specified AFIRM RSL Level 1 scope; PFAS and flame retardants excluded.

These are component and sample test results, not a whole-belt load rating or a lifespan prediction.

Test methods & specimen results

One belt-body specimen was reported at >10,000 N without breaking; the second specimen field is “-” in the report. This is not a whole-belt load, lifting or tool-belt rating. These reports did not independently verify denier, YKK authenticity or airport-security status.

SATRA TM181:2017 — reported specimen values
Tested partSpecimen 1 (N)Specimen 2 (N)
Buckle & strap263.0253.7
Buckle to belt body257.5258.0
Belt body>10,000-

Strength conclusion is reported at the test-item level. Values are not a rated working load. “-” is retained where shown in the original report.

View this belt

Leather / metal buckle

Leather Ratchet Dress Belt

Product reference (ASIN) B0DPDKY6DS

Physical report: GZHT91431592Chemical report: GZHT91431605

Premium Leather: a leather core with a surface PU film, with a metal ratchet buckle.

500flexing cycles

No listed cracking, coating separation, edge-paint flaking or multi-layer delamination was recorded; the flexing item passed.

Buckle, attachment and belt-body strength
PassSATRA TM181:2017
Chemical test items
Report-listed items: Pass.Specified AFIRM RSL Level 1 scope; PFAS and flame retardants excluded.

These are component and sample test results, not a whole-belt load rating or a lifespan prediction.

Test methods & specimen results

Flexing was assessed using QB/T 5246-2018. The result concerns the submitted sample after 500 cycles; it is not a fixed lifespan. The chemical component list is a restricted-substance testing breakdown, not a full-grain or top-grain leather certification.

SATRA TM181:2017 — reported specimen values
Tested partSpecimen 1 (N)Specimen 2 (N)
Buckle & strap353.8422.3
Buckle to belt body370.3-
Belt body609.1762.7

Strength conclusion is reported at the test-item level. Values are not a rated working load. “-” is retained where shown in the original report.

View this belt

02 / METHODS & SCOPE

What the results tell you.

Each method addresses a different property. Keep the test result with its model, sample and conditions.

SATRA TM181:2017

Strength

Tests specific straps, buckles and attachments—not the safe working load of a complete belt.

SATRA TM103:2018

Repeated extension

Tests elastic samples over repeated cycles. The results shown here are before heat ageing.

SATRA TM102:2018

Useful extension

Records extension measurements. 98.2% and 87.0% are not comfort scores or Pass/Fail ratings.

QB/T 5246-2018

Flexing

Records the leather sample’s condition after 500 flexing cycles—not its service life.

Chemical testing, with the scope made clear.

The four chemical reports record Pass for the items actually performed within the specified AFIRM RSL Level 1 scope. The tested components and panel vary by product.

Examples of included items

Formaldehyde, selected heavy metals, phthalates, PAHs, dyes, AP/APEO, organotin and other report-specific items. pH and nickel release apply where listed.

How to read “Pass”

The relevant test item met the report requirement. It does not mean every substance was tested, every component had a separate result, or all values were zero.

Outside this test scope

PFAS and flame-retardant testing were not included. A nickel-release Pass is not a zero-nickel or allergy-free guarantee.

03 / CHOOSE & USE

Make the evidence useful.

Practical guides to materials, fit, intended use and everyday care.

Materials

Metal-free and nickel: what is the difference?

Understand construction and nickel-release results.

Intended use

Pants belt or dedicated tool belt?

Choose the right type of belt for the job.

Comfort & fit

Elastic or rigid for sitting and driving?

Compare stretch and structure for your daily routine.

Care

Know which wear signs to check

Inspect the strap, buckle and attachment points.

04 / QUESTIONS & SUPPORT

Questions about your belt?

Which LionVII models are covered?

This report set covers B0D28Y6Z4P, B07P9LCSLF, B07DP5T3FN and B0DPDKY6DS. Results apply to the corresponding submitted samples and are not automatically extended to other models, colors or batches.

Does 20,000 cycles mean 20,000 days or uses?

No. It is a laboratory repeated-extension result, before heat ageing, for the submitted elastic samples. Conditioning was at 23±2°C and 50±4% R.H. for at least 48 hours; testing used the same environment. It is not a consumer-life estimate.

Is a strength result a tool-belt or safety rating?

No. Component strength results are not a whole-belt rated load, lifting rating or fall-protection rating. Use a purpose-built product for applications requiring a rated working load.

What is the tested leather belt made of?

The Leather Ratchet Dress Belt uses Premium Leather construction: a leather core with a surface PU film. The chemical report’s component list is not a full-grain or top-grain leather certification.

Does metal-free mean TSA approved?

No. Metal-free construction describes specific plastic-buckle models. These reports are not TSA or airport-security certifications and do not guarantee screening procedures.

Did the chemical testing include PFAS or flame retardants?

No. PFAS and flame-retardant testing were not part of the specified AFIRM RSL Level 1 scope for these four chemical reports.

Are these reports a product certification?

No. They record tests performed on submitted samples under the report methods and conditions. They are not product certification or a guarantee covering every LionVII belt.

How do I match a report to the belt I own?

Compare the model and ASIN on your order with the product references above. For a purchase without an ASIN, contact LionVII with your order details to confirm the model.

Where can I see the full reports?

For a complete, unedited PDF copy, email info@LionVII.com with the model or report number. Report references are listed below the ASIN in each product card.

Need a hand with your belt?

For help identifying a model or resolving a product issue, contact LionVII with your order details.

Return eligibility, item condition and shipping arrangements follow the current return policy.

Contact LionVII 30-day returns · view policy

Four selected LionVII models · eight product-specific test reports · last content review: October 2026.

Back to top

Contact US